Textile industry Material Quality Report
No.
Question
1
Are all the fabric, lining, and material used in the garments as per approved design?
2
Did you check the fabric quality test report (FPT and GPT) for the order you are inspecting – parameters like – fabric GSM, fabric weight, color fastness properties, seam slippage, button pulling strength, dimensional stability, fabric shrinkage user limit ?
3
Did you compare the print and embroidery work with the approved samples (swatch)?
4
If you found shade different between garments, did you look at approved shade band and compared that all shades within the approved fabric shade bands?
5
Did you do a visual inspection for any kind of defects?
6
There should not be an iron mark (shiny mark) and should not be an unwanted crease on the pressed garments.
7
Did you check the measurement of all sizes of garments. If there is measurement variation in some point of measure (POM) compared to the spec sheet, it must be within the tolerance level?
8
Did you check the garment fit in a dress form?
9
In case pattern matching is required (for prints, stripes, check patterns), did you check it is under allowance?
10
Did you check garment hand feels and washing quality (if applicable) as per standards?
